Advanced Search
See similar Items
Item 70565
Retail Unit Each
Mfg Name BBI
Mfg Item ID TPMP453416
UPC Code
Click for larger image
Previous Page
Next Page

Features of the BBI Endurance Pull Type Mechanical Litter, Shavings and Organics Spinner Spreader

  • Extensive use of UHMW reduces corrosion issues and extends the life of the spreader.• UHMW Bearing Back keeps bearings clean resulting in longer bearing life and fewer failures. 
  • Optional UHMW Poly Floor lasts the lifetime of the spreader. The drag coefficient is less than steel. Floor chain, motors, and gear cases last longer. 
  • 3/8” Fin - 33% thicker than traditional designs.
  • Dual Rack and Pinion gate prevents jams.
  • Flotation tires minimize compaction.
  • Innovative Spinner Motor design eliminates motor failure at the pressure seal.
  • Heavy duty gear case on mechanical spreaders.
  • Fuel and time to apply is reduced by 50%.
  • Lower Maintenance Expense.
  • Lowest "Cost In Use" Spreader on the market.
(TPMP) = Tandem Axle, Pull Type, Mechanical Powered
(4534) = 45 Degree Sides, 34" Conveyor
Carbon Steel standard - Other Options available
Body Type Options
 Standard Profile 51.5” Hopper Height from rails to top, 20 cu ft / linear foot struck, 88” wide.
 High Profile 57.5” Hopper Height from rails to top, 23.5 cu ft / linear foot struck, 88” wide.
 Low Profile 45.5” Hopper Height from rails to top, 16 cu ft / linear foot struck, 88” wide.
Model Specs 
** TPMP 4534 UNIT POWER SOURCE:  The Tractor PTO (Power Take Off) powers the spreader (specify 540 or 1000 RPM)  Heavy-duty, shielded PTO shaft supplied.  Mechanical Gearcase transfers power from the PTO to the spinners and conveyor.
** SUSPENSION AND WHEELS:  Standard suspension includes 7,000 lb Henshen "Torsion-Flex" tandem axles with  12.5L x 15 Implement Tires with 6-Bolt Hub.  Other suspension and tire options are available.
** CONVEYOR:  This 34" wide conveyor moves material to the spinners.  The chain is a heavy duty, self-cleaning pintle-type chain connected by wide flat bars (3/8" x 1 1/4 x 29") welded on every 5th link of chain (11 1/4" centers on 667X).
** CONVEYOR DRIVE:  This mechanical unit is a specially designed 50:1 gear case with a 2" diameter output shaft.  Two oil seals at each end of the worm shaft prevent oil leaks.  The split case housing design requiresd no shims at any locations.
** State of the Art - ELECTROSTATIC PAINT:  Carbon unit is totally primed with a rust-inhibiting alkyd primer and then top-coated with high gloss enamel.  Stainless unit includes all mild carbon steel parts primed and painted.    Color options include red, blue, yellow, black or green.  Some custom colors are available.
** SPINNERS AND SPINNER DRIVE:    TPMP has 24" spinners with 4 blades in the mechanical system.  Hydraulic Plug to Tractor Spinners are an option.