|
|
|
Loaders & Lifts
Willmar Wrangler 4550 Loader | Volvo L20B Loader | Toyota 6-Series Forklift |
|
|
|
Features:
- 83-hp (61.9 kW), 178-cubic-inch (3113 cm3), 4-cylinder, Deutz turbo-diesel engine with direct fuel injection.
- Single-speed, hydrostatic, 4-wheel drive.
- Heavy-duty piston pump with 15.25-gallon (57.72 L) hydraulic reservior.
- 19-gpm (3.8 L/m) auxiliary hydraulic system.
- Axial-piston drive motors with planetary gear power hubs.
- Single-lever joystick attachment operation.
- Frame is welded, heavy-duty, two-piece.
- Four-post ROPS with adjustable seat suspension, armrest and seat belt.
|
 |
- Instrumentation includes voltmeter, engine oil pressure, engine oil temperature, hour meter and fuel gauge.
- Optional enclosed cab with heater/defroster and front wiper.
- Universal quick coupler for attachments.
- Height to top of cab: 94 inches (238.76 cm) overall height with 20 cubic-foot bucket extended: 14 feet 1 inch (4.3 m); dump height: 99 inches (251.46 cm) overall dump height 150 inches (381 cm); wheel base: 64.5 inches (163.83 cm); dump angle, fully raised: 40°.
- Bucket operating load capacity; 2,450 pounds (1097 kg); pallet fork operating load capacity: 1,57 pounds (714 kg).
- Buckets: 20- 30-, 36- and 45-cubic-foot capacities (.56,.85, 1 and 1.27 m3)Pallet fork: 42 (106.7 cm) inches.
|
| Engine |
Wrangler 4550 |
| Model |
Deutz BF4M 2011
3.1 L (190 in.³)
4-Cylinder
83.1 hp (62 kW) @2800 rpm
Turbocharged
Peak torque of 199 ft.-lbs. @ 1600 rpm
Oil-cooled
Direct fuel injection
Oil pan heater starting aid
Certified EPA Non-Road Tier II
|
| Drive |
Hyrdrostatic Rexroth Series 22
Variable displacement axial piston
4.33 CIR
Full-time, 4-wheel drive
Travel pedal controls speed
Transmission control lever (F-N-R) controls direction |
| Wheel motors |
Eaton single speed
Fixed displacement axial piston |
| Power hubs |
Auburn
Planetary gear |
| Brakes, service |
Hydrostatic braking |
| Brakes, parking |
Multiple discs (spring-applied, hyrdaulic pressurereleased) located on rear power hubs |
| Auxiliary hydraulic system |
19 gpm (72 L/m) @2500 psi @2800 rpm
Flat-faced hydraulic connectors, front-mounted |
| Steering |
Articulated 40° each way
Hydraulic orbit control valve
11-ft. (3.35 m) turning radius loader clearance circle at carry position with the general purpose bucket
(20 ft.³ , 74 in. wide) |
| Speed |
Forward: 0-10 mph
Reverse: 0-8 mph |
| Axles |
Formed structure steel w/ reinforcement |
Cooling package
-Hydraulic oil
-Engine Oil |
Integral side-by-side system
3.7 in. x 8 in. 19 in. (583 in.³)
3.7 in. x 13.7 in. 19.7 in. (998.6 in.³) |
| Frame |
Welded, heavy-duty, two-piece frame
Oscillation 8° each way |
| Fuel type |
Diesel |
| Fuel tank capacity |
16 gallons (60.6 L) |
| Electrical systems |
12 VDC
55-amp alternator
Front: 2 halogen work lights, 2 amber flashers
Rear: 1 halogen work light, 2 amber flashers, 2 red clearance lights |
| Hydraulic reservoir capacity |
15 gallons (57.7 L) |
Cab
-Seat
-Instrumentation
-Enclosed cab (optional) |
ROPS/FOPS (Rollover Protection Structure/Falling Object Protective Structure)
Adjustable suspension w/ armrests and seatbelt
Voltmeter, engine oil pressure, engine oil temperature, hour meter, fuel gauge, heater, defroster, front wiper |
| Tires |
31 x 15.5 x 15, 8-ply R1, calcium chloride-filled
30.5 x 12.5 x 16.5, 8-Ply R4, calcium-filled (optional)
31 x 15.5 x 15, 8-Ply R1, puncture-proof, urethane-filled |
Lifting
-Tipping load straight (SAE rated)
--w/ bucket
--w/forks
-Tipping load at full turn (SAE rated)
--w/ bucket
--w/forks
-Operating load capacity w/ bucket
-Operating load capacity w/ forks
|
5,900 lbs. (2675 kg)
3,920 lbs. (1778 kg)
4,840 lbs. (2195 kg)
3,150 lbs. (1429 kg)
2,450 lbs. (1097 kg)
1,575 lbs. (714 kg) |
| Pallet forks |
42 in. (106.68 cm) |
Dimensions
A. Height to top of cab
B. Wheel base
C. Height to hinge pin
D. Overall operating height
E. Dump height
F. Bucket rollback, at ground
G. Dump angle, fully raised
H. Reach at max lift height
J. Overall length w/ bucket
Overall Width
Ground clearance
Chassis weight |
94 in. (23.86 cm)
64.5 in. (163.83 cm)
126 in. (320 cm)
150 in. (381 cm)
99 in. (251.46 cm)
40°
40°
19.9 in. (50.5 cm)
169.2 in. (429.77 cm) w/20 ft.³ general purpose bucket
Over tires, Rims in: 60 in.(152.4 cm); center of tread: 45 in. (114.3 cm)
Over tires, Rims out: 70 in. (177.8 cm); center of tread: 55 in. (139.7 cm)
9.75 in. w/ 31 x 15.5 x 15 tires
@8,160 lbs. (3701 kg) with general purpose bucket
Universal Quick Attach |
Bucket capacities, overall width
(bolt-on cutting edge standard)
-20 cu. ft. general purpose
-30 cu. ft. light material
-36 cu. ft. light material
-45 cu. ft. light material |
74 in. (188 cm)
63 in. (160 cm)
74 in. (188 cm)
84 in. (213.4 cm)
|
|
|
|
|
|
Click for larger view |
Data According to Bucket Type
L20B with parallel-linkage Skidsteer-attachment
carrier and 10.5/80- 18 tires |
General
Purpose |
Light
Material
|
Light
Material |
Multi-Purpose |
| Capacity heaped |
m3 |
0.6 |
0.75 |
0.95 |
0.6 |
| |
yd3 |
0.79 |
1.0 |
1.24 |
0.79 |
| Material Density |
kg/m3 |
2200 |
1800 |
1300 |
2000 |
| |
lb/yd3 |
3707 |
3033 |
2191 |
3370 |
| Static tipping load, straight (ISO/DIS) |
kg |
3200 |
3150 |
3130 |
3000 |
| |
lb |
7055 |
6945 |
6900 |
6614 |
| Static tipping load, full turn 38° (ISO/DIS) |
kg |
2800 |
2750 |
2730 |
2700 |
| |
lb |
6173 |
6063 |
6019 |
5952 |
| Hydraulic lifting capacity, max. |
kN |
34.0 |
33.5 |
33.5 |
32.5 |
| |
lbf |
7644 |
7531 |
7531 |
7306 |
| Breakout force |
kN |
31.0 |
28.0 |
25.5 |
31.0 |
| |
lbf |
6969 |
6295 |
5730 |
6969 |
| A Overall length |
mm |
5110 |
5190 |
5270 |
5110 |
| |
ft in |
16'9" |
17'0" |
17'3" |
16'9" |
| L Lift height, max. |
mm |
4100 |
4140 |
4270 |
4150 |
| |
ft in |
13'5" |
13'7" |
14'0" |
13'7" |
| V Bucket width |
mm |
1650 |
1800 |
1800 |
1650 |
| |
ft in |
5'5" |
5'11" |
5'11" |
5'5" |
| a1 Clearance circle |
mm |
8230 |
8410 |
8460 |
8230 |
| |
ft in |
27'0" |
27'7" |
27'9" |
27'0" |
| T Digging depth |
mm |
115 |
115 |
115 |
115 |
| |
ft in |
0'5" |
0'5" |
0'5" |
0'5" |
| H Dump height |
mm |
2465 |
2405 |
2280 |
2425 |
| |
ft in |
8'1" |
7'11" |
7'6" |
7'11" |
| M Reach at max. height |
mm |
765 |
815 |
925 |
715 |
| |
ft in |
2'6" |
2'8" |
3'0" |
2'4" |
| N Reach, max. |
mm |
1580 |
1630 |
1740 |
1535 |
| |
ft in |
5'2" |
5'4" |
5'9" |
5'0" |
| Operating weight |
kg |
4350 |
4360 |
4430 |
4500 |
| |
lb |
9590 |
9612 |
9766 |
9920 |
|
|
|
|
|
| The Toyota 6-Series Forklift offers refined styling, improved operability and
performance, enhanced operator comfort, easier service access, reliability, and
durability. An enhanced wide-view mast enhances safety and reduces operator fatigue.
Toyota has combined the braking and inching pedals into one ergonomic pendant pedal, and
has increased the foot space by relocating the tilt cylinders below the floorboard. |
Features:
- Outstanding lifting, lowering and travel speeds
- Non-slip hand pad and floor mat
- Hydraulic system provides a constant lowering speed to meet varying load conditions
- Safety down valve prevent the sudden drop of a load
- Front vented steel wheels enhance brake cooling capability and make for longer brake lining life
- High efficiency, high-output 3.0 liter engine
|
 |
|
|
For product information, contact Mark Posey. |
|
