Landscape & Tillage Equipment

Ag Equipment Soil Pulverizers, Compactors & Aerators

Ag Equipment's Pulverizers feature 10" I-Beams, 5" rollers with 3/8" carbon steel pins that pentrate 1" into the soil, two 150# compression springs, and 5/8" x 8" alloy steel scarifiers staggered to 2" on center to break up hardened earth. The unique welded slot is designed to hold the upper part of the 8" scarifying teeth insuring the scarifiers will remain straight no matter what the soil conditions.

Our Soil Compactors are made with heavy steel pipe to ensure consistent soil compaction and smoothness. A 1" plug allows the compactors to be filled for additional weight. Wheel packages are available for pull type compactors for easier handling. All soil compactors are available with 12", 16" or 24" diameter drums.

Ag Equipment core-plug aerators are simply the best buy on the market. They feature a pull type design or a 3-point hitch design. Both are made using a 12" diameter drum that can be filled for additional weight. A unique design allows our core tines to move slightly during operation, allowing easier penetration if subsurface obstacles are encountered. An additional feature of the 3-point hitch frame is that it has been designed to accept 16" blocks for added weight.

Specs	4 Ft.	5 Ft.	6 Ft.	7 Ft.	8 Ft.
Cutting Width	4'	5'	6'	7'	8'
# Scarifiers	4	5	6	7	8
Weight	405 lbs.	455 lbs.	515 lbs.	617 lbs.	657 lbs.

Baltimatic Rotarytiller
The Baltimatic rotarytiller is a mounted heavy duty 3-point hitch tiller designed to handle ground preparation of various crops, mixing of fertilizer and soil, ploughing pastures and meadows and a variety of other agricultural and non-agricultural applications where loose soil is a must.

• PTO Drive 510 RPM
• Rugged heavy-duty welded construction throughout
• Bolt-on A-frame
• Heavy-duty steel support wheels standard with adjustable settings for depth control
• Heavy-duty fixed gearbox with direct drive to tine assemblies ensures even power distribution.
• Heavy-duty tiller tines manufactured from special spring steel for long life.

• Three Point Hitch
• Angle Position Adjustment with Center Pin
• Notched Disc Blades
• Available in 5 1/2', 6 1/2', or 7 1/2' cutting widths
• Available with 16", 18", or 20" disc blades
• Approximate weight from 510 lbs. to 725 lbs.

Farmade Disc Harrows
Farmade economically priced discs are durable proven units designed for years of operation. These units are available in 6 cutting width options, giving them a wide horsepower tractor range.

• Sealed ball bearings mounted in heavy flange housing
• 18" or 20" notched disc blades
• Adjustable gang cutting angles
• 7 1'2" or 9" blade spacing
• Depth control system (wheel units)

• Self cleaning flexible action spreads cornstalks, straw and in-field residues
• Can be used alone or in combination with other field equipment
• Effectively incorporates Herbicides for maximum effect
• Breaks up clods and crusting in cultivated ground
• Improves moisture penetration and stimulates new growth
• Ideal for spreading manure in pastures to eliminate burn

Durabilt Landscrapers and Dirt Pans
The Durabilt Landscraper planes for irrigation, smooths feed lots, and spreads rock & gravel. They come with a 1/2" x 6" grader blade, and with or without the cylinder and hose. The dirt pan can be attached to the three point lift of a tractor and used in landscaping, agriculture, and light construction. The unit provides an efficient means of scooping, lifting and moving soil between points without dragging the soil.

Durabilt's Pasture Punch
Durabilt's Pasture Punch is used by sod farmers, hay-pastures, alfalfa growers, landscapers, and sports complexes to relieve compaction, promote air & water movement, increase decomposition of dead plant matter for improved soil, relieve root boundness, and help activate fertilizer and lime.

Mazzottie Backhoes
Check out our Mazzotti Backhoes available in Model 230 and 200. Both ship with pump and reservoir. Optional 9" and 20" buckets are available.

Model #230
• 15" bucket
• 7'7" Digging Depth
• 6'10" Loading Height
• 3450 lb Bucket Cylinder Digging Force
• 11'1" Reach from Center Line of Swing Pivot

Model #200
• 12" bucket
• 6'4" Digging Depth
• 5'10" Loading Height
• 2400 lb Bucket Cylinder Digging Force
• 9'60" Reach from Center Line of Swing Pivot

Shaver Post-hole Diggers, Drivers, and Stump Cutters
Shaver post-hole diggers give you the power to quickly and efficiently dig holes to the depth and diameter you want. Affordably priced, Shaver provides years of effective, reliable digging for farmers, ranchers, nurserymen, and fencing professionals. Shaver offers two hydraulic models and 6 PTO-driven models.

• Totally enclosed gearbox with limited 5-year warranty
• Replaceable cutting teeth and points
• Eaton motor with limited 1-year warranty
• Easy assembly and mounting
• Few moving parts to ensure long machine life

• New full-enclosure PTO shaft shields at output and input points of gearbox provide safety and protection from dirt and moisture
• Totally enclosed gearbox
• Straddle-mounted, tapered roller bearings for extra strength

Shaver post drivers pack a powerful punch. Fast and powerful, rugged and reliable, Shaver post drivers are the world's finest. With only six moving parts, these machines perform year after year without a breakdown. All models work with any 3-point hitch and can be mounted on tractors or skid steer loaders.

• Drives posts straight and true on almost any terrain
• Fast - drives a four to five-inch post in 10-15 seconds
• Offset controls allows operator to stand safely to the side of the driver
• Rubber guard shields user from impact and any flying debris
• Steel post holder securely positions posts in the driving ram

The inexpensive Stumpbuster tree stump cutter mounts to the 3-point hitch of any 35-100 HP tractor. One person controls two hydraulic cylinders from the safety of the tractor cab to raise, lower, and move the cutting wheel from side to side. The Stumpbuster can reduce up to 24" tall stumps to mulch in minutes and can grind them down to 12" below the ground surface.