|
|
|
Hay Equipment
|
|
|
|
| The H/90 V-8-10-12 unit is very simple to use and gives excellent
results. The various adjustments allow correct wheels' pressure
on terrain. The oscillation of the rakes' main arms and of the wheel-holder
small arms permit |
| correct ground contact, even on undulating grounds.
The hydraulic lift system controls the rakes lift from the tractor's
cabin without any other adjustment. This permits good working performances
both on quality and time required. |
H90 Carted Rake |
| Working Width |
20' |
23' |
27' |
| Weight |
1200 Lbs |
1355 Lbs |
1585 Lbs |
| Tires |
195-70/15 |
195-70/15 |
195-70/15 |
|
|
|
|
|
The AG EQUIPMENT EXPLORER Pull - Type V-Rake is a medium size V-Rake. This machine is designed to obtain a maximum working width of 23'3" and windrows widths adjustable from 3' to 5'.
The drawbar and the opening system are mounted over the wheels this allow to make a windrow without hindrances with the components of the machine. All rake wheels are spring-load lifted independen-tly and this allows the machine to follow the ground contours.
Tines are made of special steel with 7mm. diameter. Tines pick up the hay making fluffy windrows very suitable for baling.
A double hydraulic system, tractor driven, controls both the wheels lift and the machine total or partial opening and closing.
On the hydraulic cylinder, which controls the opening and closing of the machine, is mounted a locking valve to maintain the required working width. Even in case of pipe breaking the machine remains in the same position.
|
Explorer MX 8/10/12 |
Number of
fingerwheels |
8 |
10 |
12 |
No. of tines
for wheel |
40 |
40 |
40 |
| Working width |
17'5"/5,3 m |
20'5"/6,2 m |
23'3"/7,1 m |
| Operating speed |
14 MPH
22,5 Km/h |
14 MPH
22,5 Km/h |
14 MPH
22,5 Km/h |
Minimum power
required |
22,4 Kw
30 HP |
22,4 Kw
30 HP |
22,4 Kw
30 HP |
| Weight |
2685 Lbs
1220 Kg |
3015 Lbs
1370 Kg |
3350 Lbs
1520 Kg |
| Tire size |
205-65 R15 |
205-65 R15 |
205-65 R15 |
| Transport width |
8'3"/2,5 m |
8'3"/2,5 m |
8'3"/2,5 m |
|
|
|
|
|
The Ag Equipment Tedders are ideal machines to spread, air and turn
all types of forage in any type of terrain. The Tedder allows a
perfect and even spreading of forage.
Due to the number of models available and its versatility, the AG EQUIPMENT Tedder has been used for over 30 years in samll and large farms and has been found efficient and reliable.
The Tedder allows a perfect and even spreading of forage. Times pick up a small quantity of forage on every turn of the rotor and lay forage on the ground perfectly aired without damage or dirt.
|
ll models can be supplied with fix three point hitch or towing drawbar. The 4 rotors Tedder is also available in hydraulic version, with hydraulic lift system on the two outer rotors.
The hydraulic Tedder version allows the operation to put the machine in working or transport position through the tractor hydraulic system. |
Rotary Tedder |
Number of
rotors |
2 |
2 |
4 |
4 |
4 |
Tine arms
per rotor |
6 |
6 |
6 |
6 |
6 |
| Working Width |
8'3" (2,52 m) |
10' (3,05 m) |
17' (5,20 m) |
17' (5,20 m) |
19' (5,80 m) |
| Transport Width |
7'3" (2,2 m) |
8'9" (2,67 m) |
10'3"(3,15 m) |
10'3"(3,15 m) |
11' (3,35 m) |
| Weight |
360 Lbs (165kg) |
385 Lbs (175kg) |
950 Lbs (430kg) |
1000 Lbs (455kg) |
1225 Lbs (555kg) |
| Tire |
16x6.50-8 |
16x6.50-8 |
16x6.50-8 |
16x6.50-8 |
16x6.50-8 |
PTO Tractor
Requirement |
14 hp (10kw) |
15 hp (11kw) |
25 hp (18kw) |
25 hp (18kw) |
25 hp (18kw) |
| PTO Slip Clutch |
Standard |
Standard |
Standard |
Standard |
Standard |
| Operating Speed |
10 mph (16Km/h) |
10 mph (16Km/h) |
10 mph (16Km/h) |
10 mph (16Km/h) |
10 mph (16Km/h) |
|
|
|
|
|
|
|
|
| KORY RUNNING GEAR means big load hauling with rugged dependability. For years this running gear has proven itself "best in the field". It provides maximum stability, short turning radius, auto type steering and heavy duty tapered roller bearings. Unique Kory tow-bar is adjustable to a variety of lengths. Strong box girder design and heavy duty reach braces provide excellent strength for big loads. All are designed for non-highway use at tractor speeds. |
Kory Running Gears |
| Capacity |
5T
Model 5566 |
6T
MODEL 6672 |
8T
MODEL 6872 |
8T - WT
MODEL 6892 |
10T
MODEL 6072 |
10T - WT
MODEL 6092 |
| TREAD |
66" |
72" |
72" |
92" |
72" |
92" |
| AXLES |
2 1/2" x 5" x 11 Ga.
Wall Structural
Steel Tubing |
3 x 6 x 10 Ga.
Structural
Steel Tubing |
3 x 6 x 3/16" Thick
Structural
Steel Tubing |
3 x 6 x 3/16" Thick
Structural
Steel Tubing |
4 x 8 x 3/16" Thick
Structural
Steel Tubing |
4 x 8 x 3/16" Thick
Structural
Steel Tubing |
| REACH |
Double Strength
Torsion 2 1/2" x .140 Wall
x 6' - 0 " |
Double Strength
Torsion 2 1/2" x .140 Wall
x 6' - 0 " |
Double Strength
Torsion 3" x 3/16" Wall
x 6' - 0" |
Double Strength
Torsion 3" x 3/16" Wall
x 6' - 0" |
Double Strength
Torsion 3" x 3/16" Wall
x 6' - 0" |
Double Strength
Torsion 3" x 3/16" Wall
x 6' - 0" |
| REACH EXTENSION |
77 ½" x - 117 ½" |
77 ½" x - 117 ½" |
77 ½" x - 117 ½" |
77 ½" x - 117 ½" |
77 ½" x - 117 ½" |
77 ½" x - 117 ½" |
| |
5/8" Rod |
1" x 5/32" Wall
Steel Tubing |
1" x 5/32" Wall
Steel Tubing |
1 1/4" x 7/32" Wall
Steel Tubing |
1" x 5/32" Wall
Steel Tubing |
1 1/4" x 7/32" Wall
Steel Tubing |
| TIE RODS |
Clevis Type |
Truck Type |
Truck Type |
Heavy Duty
Truck Type |
Truck Type |
Heavy Duty
Truck Type |
| SPINDLES |
1 5/8" Carbon Steel |
1 5/8" Carbon Steel |
1 3/4" Carbon Steel |
1 3/4" Carbon Steel |
2" Carbon Steel |
2" Carbon Steel |
| BEARINGS |
Tapered Roller
Inner & Outer |
Tapered Roller
Inner & Outer |
Tapered Roller
Inner & Outer |
Tapered Roller
Inner & Outer |
Tapered Roller
Inner & Outer |
Tapered Roller
Inner & Outer |
| HUBS |
Heavy Duty
5 - Bolt |
Heavy Duty - 6 Bolt
Press Fit
Studs & Nuts |
Heavy Duty
6 - Bolt |
Heavy Duty
6 - Bolt |
Heavy Duty
6 - Bolt |
Heavy Duty
6 - Bolt |
| WHEELS |
5.00 x 15 |
6.00 x 15 |
6.00 x 15 |
6.00 x 15 |
8.00 x 15
for Flotation Tires |
8.00 x 15
for Flotation Tires |
| TONGUE |
Formed
7' Steel
Tapered Channel
65" Drawbar
Eye & King Pin |
Extra Heavy
Formed 7" Steel
Tapered Channel
65" Drawbar
Eye & King Pin
(Quick-Hitch Optional)
|
Extra Heavy
Formed 7" Steel
Tapered Channel
65" Drawbar
Eye & King Pin
(Quick-Hitch Optional) |
Extra Heavy
Formed 7" Steel
Tapered Channel
65" Drawbar
Eye & King Pin
(Quick-Hitch Optional) |
Extra Heavy
Formed 7" Steel
Tapered Channel
65" Drawbar
Eye & King Pin
(Quick-Hitch Optional) |
Extra Heavy
Formed 7" Steel
Tapered Channel
65" Drawbar
Eye & King Pin
(Quick-Hitch Optional) |
| BOLSTER STAKES |
12 Ga.
Adj. 38" x 42" |
10 Ga.
Adj. 38" x 42" |
10 Ga.
Adj. 38" x 42" |
10 Ga.
Adj. 38" x 42" |
7 Ga.
Adj. 38" x 42" |
7 Ga.
Adj. 38" x 42" |
WEIGHT
(With Tires) |
470 lb.
w/tires |
500 lb.
w/tires |
600 lb.
w/tires |
725 lb.
w/tires |
725 lb.
w/tires |
875 lb.
w/tires |
|
|
|
|
|
The Pequea 646 Round Bale Transport is designed with a low profile and front dolly wheel turning system for easy maneuvering in tight spots.
Quickly loaded and unloaded, these bale movers also have center marking antennas to aid in proper bale placement.
|
|
| Width |
9'1" |
| Length |
23'4" |
| Track Width |
7'4" |
| Bale Arm Spacing |
36" |
| Main Frame |
4 x 10 x 1/4 |
| Bale Arms |
4 x 4 x 3/16 |
| Wheels* |
Optional |
| Tongue |
Adj. 72" - 85" |
| Loading Height |
23" |
|
|
|
|
|
| Feed your cows efficiently, saving time and money. These feeders handle loads
of round or square bales or any mixture of grain and forage, feeding up to 52 head at one time. An efficient slant-bar system prevents cows from pushing each other away from feeding spaces, reducing loss of feed from spills. Some models with optional end gates open fully to allow convenient 3 pt. loading. The low bunk height accommodates any size cow. |
|
| MODEL |
510S |
520 |
525 |
530T |
520H |
| Overall Length |
10' |
22'4" |
27'4" |
32'4" |
22'4" |
| Track Width |
6'2 1/2" |
7'3" |
| Bunk Width |
6'2 1/2" |
| Bunk Length |
10' |
20' |
25' |
30' |
20' |
| Feed Openings |
22 |
38 |
46 |
52 |
25 |
| Slant Bar Spacing |
15" |
4 1/2" or 7" |
| Spindle |
N/A |
2" |
| Hubs |
N/A |
6 Bolt W888 |
| |
N/A |
Adjustable |
| Tongue |
N/A |
Optional |
| Wheels |
24" |
28" |
| Feeding Height* |
4'11" |
5'3" |
5'7" |
| End Gate |
Available |
N/A |
*With 11L-15 Tires |
|
|
|
|
- Provides improved turning capabilities
- Provides improved flotation for mower
- Provides easy tractor hook-up
- Available with or without hydraulic lift
- Easy bolt-on application for disc mower
|
CC1 Cutter Caddy |
| Mower Size: |
Up to 9 1/2' |
| Width: |
90" |
| Length: |
13' |
| Weight: |
1500 LBS. |
|
|
|
|
|
| Now ... get' em up and move 'em out quilckly from behind the baler or from storage to feeding area.
The new TUMBLEBUG is truly a one man (time saving) machine. It requires no winches, no ropes, no hydraulics, it's "self loading", quality built and ready for the big bales.
From the comfort of your pickup truck or tractor, loading is a snap, a few seconds to load and less to unload. |
The loading action is UNBELIEVABLE until you have seen it perform. Back up to the bale, flip the switch, the brake action does the trick. Now that you have the BIG BALE in the cradle, trasport it any place you wish. |
Tumblebug Bale Mover |
| Weight: 500 lbs. (approx.) |
Cradle & Tongue: Tubular Steel |
| Length: 144" |
2" Ball Coupler |
| Between the Wheels: 82" |
Complete Wiring Kit for towing Service |
| Electric Brakes |
|
|
|
|
|
|
Begin with the basic elevator... and custom make a bale handling system to fit your specific needs... all at a surprisingly low cost!
Basic elevator includes a drive unit, plus an end section with sprocket and chain tightener. Basic elevator can be easily lengthened by adding interchangeable long and short center extensions. A complete line of accessories are available to make storing bales a smooth, quick and simple one-man operation.
|
Hayrite Hay Elevator Model 1800A
|
| Component Lengths |
|
|
| Metal Description |
Basic Unit |
Extensions |
| Extra Heavy-Duty |
18' |
12' or 6' |
| Standard |
16' |
8' or 4' |
|
| High Strength 1" square tubing - 70% more flexural strength than comparable round tubing. |
X |
X |
| Heavier design - use as inclined conveyor, mow conveyor or both. |
X |
X |
| Thicker-walled 15 ga. steel construction. |
X |
|
| 'Bridge truss' side reinforcements along full length of elevator prevent sagging, bowing, twisting, and bending. Inclined elevators are self-supporting up to 54'. |
X |
|
| Higher side rails allow bales to sit down deep in elevator (preventing irregular-shaped bales from tumbling out). |
X |
|
| Extra heavy-duty No. 62 conveyor chain equipped with raised links every 24" for more positive movement. |
X |
|
| Heavy-duty No. 55 conveyor chain equipped with raised links every 24" for more positive movement. |
|
X |
| Bronze pillow block bearings on drive unit - self — aligning with grease zerks. |
X |
X |
| Full 1" solid head and jack shafts. |
X |
X |
| Permanently-lubricated, sealed ball-bearing idler sprockets. |
X |
|
| Greasable, bronze-bushing idler sprockets. |
X |
|
| Stronger No. 40 roller chain final drive. |
X |
X |
| All electrically wire-welded construction — welds go all the way around seams for added strength. |
X |
X |
| Sturdy, universal motor mount for electric motors is adjustable for leveling, belt take-up and "stop and go" operation. Mount is quickly detachable for inside storage of motor (drive belt included) |
X |
X |
| Powder-coated red finish... for longer life. |
X |
X |
|
|
|
| Ag Equipment USA offers parts for many
brands of hay-making equipment. For information on Parts, please contact Keith Pirtle or Keith Apple.
For product inquiries, please contact Brett Nanney. We're happy to help you at Hay Days
or other events in your local area. |
|
